How to display Voyages in the Rotation Planning Module

Owned by Ryan Gariguez, created
Last updated: May 09, 2023 by Sigrid Kviteberg
2 min read

In this article, you will learn what actions to take in case your customers have enabled the Voyages feature on their APM, which can be located within the rotational module.

Introduction

A voyage normally consists of several port calls. In Adonis, we add the port calls in the Crew Change module and unite several of them into a voyage. https://adonishr.atlassian.net/wiki/spaces/KB/pages/4536992769

This article explains how to display the Voyages information in the Rotation Planning Module.

Step-by-step guide

To display the Voyages information in the Rotation Planning Module:

  1. Open the Rotation Plan.

  2. Go to the Options > Rotation Shift Gant.

     

  3. In the Data Display tab, go to “Gantt Diagram Area” and tick the box or check the “Display Voyage/ Cruise information” and then Click OK to confirm.

  4. Once done, the voyages will be displayed as illustrated below.

See also

https://adonishr.atlassian.net/wiki/spaces/KB/pages/4536992769